CNC Turning
Ø350 mm — high-accuracyACE Manufacturing Systems CNC turning centre for repeat-production turning of pressure-bearing components.
Plot 166 · Vartej GIDC · Bhavnagar
Precision heavy engineering,
built to specification.
JSW primary steel · CNC machining to 1000 mm dia · 250 MT hydraulic press · pressure-tested components for industrial OEMs.A multi-OEM Tier-1 supplier serving Kirloskar and other leading machinery manufacturers.
EST2017
UDYAMGJ-05-0002374
GSTIN24AASFB3192N1ZX
SUPPLIES TOKirloskar & industrial OEMs
Snapshot
A heavy-engineering partnership built for industrial OEMs that demand consistency at scale.
BHB Incorporate operates a full-spectrum machining and fabrication line at Vartej GIDC, Bhavnagar. We source primary steel from JSW, cut and machine to drawing on CNC and conventional turning, and ship only after dedicated pressure leak-testing — the exact consistency our OEM customers rely on for their assemblies.
1000 mmMax turning diaLathe capacity
250 MTHydraulic pressIn-house forming
300 mmPlate cutting thicknessCNC flame, ±0.5 mm
10 MTOverhead crane50 MT weighbridge
Capabilities
A single shop floor.
Eight production capabilities.
We run a tightly integrated process line — cutting, pressing, turning, milling, welding, testing, marking — under one roof. That removes the inter-vendor variance that kills consistency in heavy fab, and lets us guarantee dimensional and pressure compliance before parts leave the gate.
Vertical Machining (VMC)
850 × 550 mm bedACE VMC for milling, drilling, contouring on flange faces, manifold bodies, and complex prismatic parts.
Heavy Lathe
Ø1000 mm — large diaGaytri Aryan / Ganesh lathe for large-diameter housings, end covers, pump bodies up to 1 metre dia.
CNC Flame Cutting
Up to 300 mm thick · ±0.5 mmAakruti CNC flame cutting system. Profile-cuts JSW steel plate to drawing, feeding the machining line.
Hydraulic Press
250 MTIn-house press for forming and upsetting operations. Built on Alang-base heavy engineering platform.
Pressure Leak Testing
Hydrostatic / PneumaticEvery pressure-bearing component is leak-tested before dispatch — the cornerstone of our OEM quality covenant.
Welding & Fabrication
MIG / SAW / TIG-capableStructural welding and fabrication, with 10 MT overhead crane and 50 MT weighbridge for heavy assemblies.
Marking & Engraving
Part identificationDedicated punching and engraving station for traceability marking on every component shipped.
Process
From plate to pressure-tested part — eight steps, one shop floor.
Every part follows the same disciplined flow. Material in. Cut. Turn. Mill. Mark. Finish. Test. Dispatch. The same line that ships to Kirloskar serves every other industrial OEM we supply — the product reaches each customer with the same provenance, the same tolerances, the same leak-test certificate.
- 01
Raw material in
JSW primary steel arrives — fully traceable to mill heat number.
- 02
CNC flame cut
Profile-cut to drawing up to 300 mm thick, ±0.5 mm accuracy.
- 03
Lathe turning
Conventional and CNC turning. Up to 1000 mm dia heavy work.
- 04
VMC / CNC milling
Faces, bores, holes machined to print on the 850 × 550 VMC.
- 05
Marking / engraving
Part number + heat number stamped for full traceability.
- 06
Final turn / finish
Final dimensional pass and surface finish to drawing.
- 07
Pressure leak test
Every pressure-bearing part tested before dispatch. Zero-leak gate.
- 08
Dispatch
Vendor handoff or direct delivery to the OEM assembly line.
Equipment list
Twelve machines.
One disciplined line.
Capacity inventory of our Vartej plant. Capable of handling parts up to a metre in diameter and tens of tonnes in weight, with finishing tolerances suitable for pressure-rated OEM components.
| # | Machine | Capability |
|---|---|---|
| 01 | CNC Flame Cutting Machine | Up to 300 mm · ±0.5 mm accuracy |
| 02 | CNC Turning Machine | Ø350 mm turning |
| 03 | Vertical Machining Centre (VMC) | 850 × 550 mm job capacity |
| 04 | Heavy Lathe | Ø1000 mm turning |
| 05 | Hydraulic Press | 250 MT |
| 06 | Air Compressor + Dryer | Plant-wide pneumatic supply |
| 07 | Drilling Machine | Heavy drilling |
| 08 | Punching / Marking Machine | Part identification stamping |
| 09 | Oxygen Tank | 2 KL capacity |
| 10 | Welding Machines | MIG / SAW / TIG |
| 11 | Overhead Crane | 10 MT |
| 12 | Weighbridge | 50 MT |
Quality
No part leaves the gate
until it has earned it.
Consistency is what our OEM customers buy from us. We engineer for it at every step — traceability on raw material, marking on every part, and a final pressure-leak test that gates dispatch. Quality is not a final-stage inspection — it is the entire flow.
StatusISO 9001:2015 audit in progress, 2026
Pressure leak testing
Every pressure-bearing component is leak-tested before dispatch. No part leaves the gate without passing the leak test — the cornerstone of our OEM quality covenant.
Mill-traceable raw material
JSW primary steel only. Every heat number is recorded and traceable through cutting, machining, and dispatch.
Dedicated marking station
Part number plus heat number stamped on every component. Traceability from foundry to assembly.
Single-shop discipline
From plate to finished part on one shop floor — eliminating the inter-vendor variance that kills consistency in heavy fab.
Customers
Tier-1 supplier to leading industrial OEMs.
Confirmed OEM customer
KirloskarPumps · Pneumatic · Hydraulics · Oil Engines
Our components flow into Kirloskar machinery assemblies. The same process line — JSW steel in, CNC machining, pressure leak testing, dispatch — serves multiple industrial OEMs. The product is the same. The discipline is the same. The certificate is the same.
Additional OEM customer references available on request, subject to confidentiality terms with each buyer.
Components for
Pumps
Components for
Compressors
Components for
Hydraulics
Components for
Engines
Certifications
Compliance ladder, transparent.
We name what we have, what we are working on, and what is on the roadmap. No over-claiming. Procurement teams deserve to see the real picture before they shortlist.
Active
Udyam Registration
UDYAM-GJ-05-0002374Government of India MSME registration, classified Small Enterprise (Manufacturing).
Active
GST Registration
24AASFB3192N1ZXActive GSTIN under the Government of Gujarat, Commercial Tax Department.
In progress
ISO 9001:2015 — QMS
Audit in progressQuality Management System certification audit booked with a NABCB-accredited body, 2026.
Roadmap
ISO 14001 / ISO 45001
RoadmapEnvironmental and Occupational Health & Safety management systems, scheduled in combined audit cycle.
Roadmap
IBR — Indian Boiler Regulations
RoadmapComponent-level approval for pressure-bearing parts entering steam systems.
Roadmap
API 6D · ASME · PED
RoadmapPipeline, pressure vessel, and EU export certifications planned in sequence as product mix expands.
Contact
Send us your drawing.
We will send back a quote.
Email a PDF, STEP, or DWG file with quantity and timeline. We respond with a costed, technical reply — typically within 48 hours for known component families, sooner if the part fits our active production mix.
Plant address
M/S BHB IncorporatePlot No. 166, GIDC Estate
Vartej, Bhavnagar — 364060
Gujarat, India
GSTIN
24AASFB3192N1ZX
PAN
AASFB3192N
Udyam
UDYAM-GJ-05-0002374
Established
2017